• Please Select Your Region from the Map

C-300 Case Erector

Square Cases & No Jams

Brochure

C-300 Case Erector

Available Options

  • Non-Standard Case Dimension Machine can be modified for a variety of case dimensions. Please contact Lantech for details.
  • Communication Various communication configurations possible. Please contact Lantech for details.
  • Exit Height Extension The exit height of the cases can be extended in increments of 2" up to a maximum of 33.5".
  • Tape Head Storage Bracket Holds additional tape head.
  • Beacon Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
  • 75 mm (3") Tape Head Applies 75 mm (3") wide tape. Replaces Standard 50mm tape head.

Specifications

Performance
  • Throughput Speed 10 cases per minute
  • Case Size Minimum (Outside Dimensions) 200 mm L x 150 mm W x 150 mm H (7 7/8" L x 5 7/8" W x 5 7/8" H)
  • Case Size Maximum (Outside Dimensions) 500 mm L x 350 mm W x 600 mm H (19 5/8" L x 13 3/4" W x 23 5/8" H)
Case Criteria
  • Case Types RSC, HSC, FEFCO 0200/0201
  • Flute Types B, C
  • Wall Types Single wall (test for multiple wall)
Bottom Seal
  • Tape Lantech TH-Series
  • Hot Melt Not available
Service Requirements
  • Air Supply 6 Bar (80 Psi)
  • Dedicated Electric Service Req. US 230V, 3-ph, 60 Hz, Wye w/Ground
  • Dedicated Electric Service Req. EU 3L-PE-400V-50 Hz-Neutral
Machine Data
  • Magazine infeed Capacity 200 cases (approximate)
  • Weight 525 kg (1155 lbs)
  • Dimensions 2140 mm L x 2230 mm W x 1600 mm H (84 1/4" L x 87 3/4" W x 63" H)
  • Outfeed Pass Height 600 mm +/- 30 mm (23 5/8" +/- 1 1/8")
Warranty
  • Warranty Duration 3 years (Unlimited cycles)

More Options Available, Contact Lantech