• Please Select Your Region from the Map

NEW CI-2000
Case Erector

Square Cases & No Jams


CI-2000 Case Erector

Available Options

  • Non-Standard Case Dimension Machine can be modified for a variety of case dimensions. Please contact Lantech for details.
  • High Speed Increases speed to maximum of 25 cases per minute. Please contact Lantech for details.
  • Communication Various communication configurations possible. Please contact Lantech for details.
  • Stainless Steel Frame or Components Please contact Lantech for details.
  • Exit Height Extension The exit height can be extended.
  • Tape Head Storage Bracket Holds additional tape head.
  • 3in Tape Head Applies 3" wide tape. Replaces standard 2" tape head.
  • Extended Magazine Increases the number of blanks the magazine holds.
  • Short Magazine Decreases the number of blanks the magazine holds.
  • Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.


  • Throughput Speed 8 cases per minute (20 cpm with option)
  • Case Size Minimum (Outside Dimensions) 200 mm L x 150 mm W x 150 mm H (7 7/8" L x 5 7/8" W x 5 7/8" H)
  • Case Size Maximum (Outside Dimensions) 620 mm L x 450 mm W x 650 mm H (24 1/2" L x 17 3/4" W x 25 5/8" H)
Case Criteria
  • Case Types RSC, HSC, FEFCO 0200/0201
  • Flute Types B, C, E or combinations
  • Wall Types Single & double wall (test for multiple wall)
Bottom Seal
  • Tape Lantech TH-Series
  • Hot Melt Refer to Manufacturer Manual
Service Requirements
  • Air Supply 6 Bar (80 Psi)
  • Dedicated Electric Service Req. US 230V, 3-ph, 60 Hz, Wye w/Ground
  • Dedicated Electric Service Req. EU 3L-PE-400V-50 Hz-Neutral
Machine Data
  • Magazine infeed Capacity 200 cases (approximate)
  • Weight 825 kg (1820 lbs)
  • Dimensions 3580 mm L x 1570 mm W x 2400 mm H (141" L x 61 4/5" W x 94 1/2" H)
  • Outfeed Pass Height 600 mm +/- 30 mm (23 5/8" +/- 1 1/8")
  • Warranty Duration 3 years (Unlimited cycles)

More Options Available, Contact Lantech