Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Increases speed to maximum of 20 trays per minute. Please contact Lantech for details.
Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components
Please contact Lantech for details.
Exit Height Extension
The exit height of the cases can be extended.
Many options available for tray types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
An alarm sounds to indicate the presence of a fault condition.
Throughput Speed Up to 20 Trays/Minute
Tray Size Minimum
(Outside Dimensions) 180 mm L
100 mm W
40 mm H
(7 1/10" L x 4" W x 1 1/2" H)
Tray Size Maximum
(Outside Dimensions) 260 mm L
340 mm W
200 mm H
(10 1/4" L x 13 3/8" W x 7 7/8" H)
Tray Types Tray with Lid
Wave Types B, C, E Wave or Combinations
Single & Double Wall
(test for multiple wall)
Tray Closure Refer to Manufacturer ManualService Requirements
Air Supply 6 Bar (80 Psi)
Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50 Hz-NeutralMachine Data
Magazine infeed Capacity 280 Blanks (approximate)
2730 mm L
1480 mm W
1800 mm H
(107 1/2" L x 58 1/4" W x 70 7/8" H)
Warranty Duration 3 Years, Unlimited Cycles