High Speed Machine can be modified for a variety of lid styles and dimensions. Please contact Lantech for details.
Communication Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components Please contact Lantech for details.
Exit Height Extension The exit height of the trays can be extended.
Extended Magazine Increases the number of blanks the magazine holds.
Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
Beacon Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Acoustic Signal An alarm sounds to indicate the presence of a fault condition.
Throughput Speed Up to 18 lids per minute
Lid Size Minimum (Outside Dimensions) 285 mmL x 205 mm W x 40 mm H (11 1/5" L x 8 1/16" W x 1 1/2" H)
Lid Size Maximum (Outside Dimensions) 600 mm x L 400 mm W x 70 mm H (23 5/5" Lx 15 3/4: W x 2 3/4"H)
Lid Types FEFCO 0458/0425/0453
Wave Types B, C, E Wave or combinations
Wall Types Single & double wall (test for multiple wall)
Stacking Edge Closure
Closing Method Robatech/Nordson
Air Supply 6 Bar (80 psi)
Electric Service 3L-PE-400V-50Hz-Neutral (230V, 3ph, 60Hz, Wye w/ Ground)
Weight 1050 kg (2300 lbs.)
Dimensions 2800 mm L x 1480 mm W x 2500 mm H (110 1/4" L x 58 1/4" W x 98 7/16" H)