Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Increases speed to maximum of 15 lids per minute. Please contact Lantech for details.
Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components
Please contact Lantech for details.
Exit Height Extension
The exit height of the trays can be extended.
Increases the number of blanks the magazine holds.
Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
An alarm sounds to indicate the presence of a fault condition.
Non Standard Tray Styles and Dimensions
Increases speed to maximum of 20 trays per minute. Please contact Lantech for details.
Throughput Speed Up to 15 Lids/Minute
Lid Size Minimum
(Outside Dimensions) 285 mm L x 205 mm W x 40 mm H
(11 1/5" L x 8 1/16" W x 1 1/2" H)
Lid Size Maximum
(Outside Dimensions) 600 mm x L 400 mm W x 70 mm H
(23 5/8" L x 15 3/4" W x 2 3/4"H)
Lid Types FEFCO 0452/0453
Wave Types B, C, E Wave or Combinations
Wall Types Single & Double Wall (test for multiple wall)Stacking Edge Closure
Closing Method Robatech/NordsonService Requirements
Air Supply 6 Bar (80 psi)
Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/ Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50Hz-NeutralMachine Data
Weight 1050 kg (2300 lbs.)
2800 mm L x 1480 mm W x 2500 mm H
(110 1/4" L x 58 1/4" W x 98 7/16" H)
Blank Magazine Capacity 280 Blanks (approximate)Warranty
Warranty Duration 3 Years, Unlimited Cycles