Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components
Please contact Lantech for details.
Exit Height Extension
The exit height of the trays can be extended.
Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
An alarm sounds to indicate the presence of a fault condition.
Throughput Speed Up to 18 Lids/Minute
Lid Size Minimum
(Outside Dimensions) 200 mm L x 200 mm W x 100 mm H
(7 7/8" L x 7 7/8" W x 4" H)
Lid Size Maximum
(Outside Dimensions) 600 mm L x 400 mm W x 400 mm H
(23 5/8" L x 15 3/4" W x 15 3/4" H)
Lid Types Basic & Display Trays
Wave Types B, C, E Wave or Combinations
Wall Types Single & Double WallStacking Edge Closure
Closing Method Robatech/NordsonService Requirements
Air Supply 6 Bar (80 psi)
Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/ Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50Hz-NeutralMachine Data
Weight 550 kg (1200 lbs.)
2500 mm L x 1490 mm W x 1800 mm H
(98 7/16" L x 58 11/16" W x 70 7/8" H)
Blank Magazine Capacity N/AWarranty
Warranty Duration 3 Years, Unlimited Cycles