High Speed Increases speed to maximum of 20 trays per minute. Please contact Lantech for details.
Communication Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components Please contact Lantech for details.
Exit Height Extension The exit height of the trays can be extended.
Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
Beacon Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Acoustic Signal An alarm sounds to indicate the presence of a fault condition.
Throughput Speed Up to 20 trays per minute
Tray Size Minimum (Outside Dimensions) 180 mm L x 100 mm W x 40 mm H (7 1/10" L x 4" W x 1 1/2" H)
Tray Size Maximum (Outside Dimensions) 260 mm L x 340 mm W x 200 mm H(10 1/4" L x 13 3/8" W x 7 7/8" H)
Tray Types Tray with Lid
Wave Types B, C, E Wave or combinations
Wall Types Single & double wall (test for multiple wall)
Closing Method Refer to Manufacturer Manual
Air Supply 6 Bar (80 psi)
Electric Service Req. US 230V, 3ph, 60Hz, Wye w/ Ground
Electric Service Req. EU 3L-PE-400V-50 Hz-Neutral
Magazine Infeed Capacity 280 blanks (approximate)
Weight 750 kg (1650 lbs)
Dimensions 2730 mm L x 1480 mm B x 1800 mm H (107 1/2" L x 58 1/4" W x 70 7/8" H)