Use water at "city pressure" to clean the turntable. Make sure that the water can drain from the area.
220 V - 50/60 Hertz 15 AMP
Adds a transformer to the machine.
Operate in temperatures below -1 C to -18 C (+31 F to 0 F).
EZ Weigh™ Integrated Scale
Weigh and wrap loads in one step with a scale built into the turntable.
Helps the operator align the load properly on the turntable.
Allows the operator put the load on the turntable at floor level. This is available for 1651 mm (65") and 1829 mm (72") turntables. Note: The customer must install this option.
Increase the length and width of your loads. A turntable with a 1829 mm (72") or 2438 mm (96") diameter is available. Note: The 2438 mm (96") turntable has a maximum of 8 rpm.
Operation in corrosive environment. It is for machines with exposure to agents such as salt and fertilizer.
Netting Film Delivery System (FDS)
Applies stretchable and non-stretchable netting. This is for loads that have a requirement for ventilation. Note: This FDS cannot use the standard stretch films.
Add a second turntable to increase efficiency. The operator can start the wrap cycle on the first turntable and put a load on the second turntable.
"Non Powered" Turntable Conveyor
The maximum load weight is 1814 kg (4000 lb). The maximum load dimensions are 1702 mm L x 1321 mm W x 1905 mm H (67" x 52" x 75"). The pass height is 178 mm (7").
Operate in temperatures of -29 C (-20 F).
Peak Production Speed Up to 25 Loads/Hr
Load Size Diagonal (Recommended) 1829 mm (72")
Maximum Load Wrap Height 2032 mm (80")
Maximum Load Weight 1588 kg (3500 lbs)Load Handling
Turntable Speed (Variable) 8 RPM
Turntable Size 1651 mm (65") diameter
Turntable Drive 1/2 HP TEFCPerfomance Features
XT Cut and Clamp 5.0® Not Available
Auto Film Cut-Off™ Not Available
Pallet Grip® Not Available
Load Guardian Not Available
Standard Film Width 500 mm (20")
EZ Thread Film Delivery Standard
Standard Pre-Stretch 60%
Wrap Force Variable (Mechanical)
Film Capacity 250 mm (10") Roll Diameter
Film Delivery System Roller-Stretch
EZ Weigh Integrated Scale OptionalWeight and Size
Approx. Shipping Weight 567 kg (1250 lbs)
3023 mm L
1702 mm W
(119" L x 67" W x 92" H)
Pneumatic Not Applicable
Dedicated Electric Service Req. US 120 VAC, 20 AMP
Dedicated Electric Service Req. EU 1L-220V-16AMP-50HzWarranty
Warranty Duration 5 Year, Unlimited Cycles, All Components Covered
Room A320, Block 24, No.588, Xinjun Huan Road, Shanghai 201114, PRC