Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Non-Standard Case Dimension
Machine can be modified for a variety of case dimensions. Please contact Lantech for details.
Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components
Please contact Lantech for details.
Exit Height Extension
The exit height of the cases can be extended to 850 mm (33 1/2").
Tape Head Storage Bracket
Holds additional tape head.
75mm (3") Tape Head
Applies 75 mm (3") wide tape. Replaces Standard 50 mm (2") tape head.
Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
An alarm sounds to indicate the presence of a fault condition.
Max 25 Cases/Minute
(Options and application can change the speed.)
Case Size Minimum
(Outside Dimensions) 200 mm L
150 mm W
120 mm H
(7 7/8” L x 5 15/16” W x 4 3/4” H)
Case Size Maximum
(Outside Dimensions) 620 mm L
510 mm W
500 mm H
(24 2/5” L x 20 1/8” W x 19 11/16” H)
Case Types RSC, HSC, FEFCO 0201
Flute Types B, C, E
Wall Types Single and Double WallBottom Seal
Tape Lantech® TH-Series Tape HeadWeight and Size
Approx. Shipping Weight ±575 kg (±1265lb)Service Requirements
Pneumatic 6 Bar (80 Psi)
Dedicated Electric Service Req. US 230V, 3-ph, 60Hz, Wye w/Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50Hz-NeutralWarranty
Warranty Duration 3 Year