ProfitPack Machine Bypass Mode
This option allows the Profit Pack product conveyor to continue to run, while bypassing the Sealer. Access through HMI.
ProfitPack Complete Detection Beacons
This option provides a complete detection four color LED beacon on the Erector that alerts operator. Top to bottom; Red burning - general failure, Orange blinking - low tape, Orange burning - out of tape or broken tape, Blue blinking - low blanks in magazine, Blue burning - magazine empty, Green burning - machine in standby. Detection on the Sealer; Orange blinking - low tape, Orange burning - out of tape or broken tape, Green burning - machine running or standby.
ProfitPack Product Conveyor Height Adjustment
Hydraulic height adjustment on Profit Pack product infeed conveyor between 39.36" - 47.25" (1000-1200mm).
Infeed Product Conveyor Width 13.77" (350mm) Smooth Surface Belt
Standard smooth surface belt with width of 13.77" (350mm).
Infeed Product Conveyor Width 7.87" (200mm) Smooth Surface Belt
Standard smooth surface belt with width of 7.87" (200mm).
Non Standard Paint
Machine frame and metal guarding in color other than standard Lantech RAL 5003. Covers all frame and metal plating in addition to roller conveyor. RAL color is required at time of order.
Throughput Speed 8 Cases/Minute
Case Size Minimum
(Outside Dimensions) 200 mm L
150 mm W
250 mm H
(7 7/8" L x 5 7/8" W x 9 7/8" H)
Case Size Maximum
(Outside Dimensions) 620 mm L
450 mm W
650 mm H
(24 3/8" L x 17 3/4" W x 25 5/8" H)
Case Types RSC, HSC, FEFCO 0200/0201
Flute Types B, C
Wall Types Single WallBottom Seal
Tape Lantech TH-Series
Hot Melt Not ApplicableService Requirements
Air Supply 6 Bar (80 Psi)
Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50Hz-NeutralMachine Data
Magazine infeed Capacity Not Applicable
Weight ±1000 kg (±1265 lbs)
*ProfitPack 400 Single Station
2540 mm W
1600 mm H
(244 3/16” L x 100 1/8” W x 63” H)
*ProfitPack 400 Double Station
7200 mm L
2540 mm W
2500 mm H
(283 5/8” L x 100 1/8” W x 63” H)
Outfeed Pass Height Not ApplicableWarranty
Warranty Duration 3 Years, Unlimited Cycles