ProfitPack Machine Bypass Mode
This option allows the ProfitPack product conveyor to continue to run, while bypassing the Sealer. Access through HMI.
ProfitPack Complete Detection Beacons
This option provides a complete detection four color LED beacon on the erector that alerts operator. Top to bottom; Red burning - general failure, Orange blinking - low tape, Orange burning - out of tape or broken tape, Blue blinking - low blanks in magazine, Blue burning - magazine empty, Green burning - machine in standby. Detection on the Sealer; Orange blinking - low tape, Orange burning - out of tape or broken tape, Green burning - machine running or standby.
ProfitPack Product Conveyor Height Adjustment
Hydraulic height adjustment on ProfitPack product infeed conveyor between 39.36" - 47.25" (1000-1200mm).
Infeed Product Conveyor Width 13.77" (350mm) Smooth Surface Belt
Standard smooth surface belt with width of 13.77" (350 mm).
Infeed Product Conveyor Width 7.87" (200mm) Smooth Surface Belt
Standard smooth surface belt with width of 7.87" (200 mm).
Non Standard Paint
Machine frame and metal guarding in color other than standard Lantech RAL 5003. Covers all frame and metal plating in addition to roller conveyor. RAL color is required at time of order.
Throughput Speed 10 Cases/Minute
Case Size Minimum
(Outside Dimensions) 200 mm L
150 mm W
150 mm H
(7 7/8" L x 5 7/8" W x 5 7/8" H)
Case Size Maximum
(Outside Dimensions) 500 mm L
350 mm W
600 mm H
(19 5/8" L x 13 3/4" W x 23 5/8" H)
Case Types RSC, HSC, FEFCO 0200/0201
Flute Types B, C
Wall Types Single WallBottom Seal
Tape Lantech TH-Series
Hot Melt Not ApplicableService Requirements
Air Supply 6 Bar (80 Psi)
Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50Hz-NeutralMachine Data
Magazine infeed Capacity Not Applicable
Weight ±950 kg (±1155 lbs)
*ProfitPack 300 Single Station
6050 mm L
2430 mm W
1600 mm H
(238 5/16” L x 95 3/4” W x 63” H)
*ProfitPack 300 Double Station
7050 mm L
2430 mm W
1600 mm H
(277 11/16” L x 95 3/4” W x 63” H)
Outfeed Pass Height Not ApplicableWarranty
Warranty Duration 3 Years, Unlimited Cycles