G Series - How To
How to Install, Operate and Troubleshoot the G Series Stretch Wrapper
How to Install
How to Install
Step by step instructions on how to properly install a G Series stretch wrapper from Lantech.
How to Attach a Ramp
If you use pallet jacks then you will need a ramp for your G Series. This video includes detailed instructions on how to install a ramp for your G Series pallet wrapper.
How to Operate
How Do I Put the Load on the Turntable?
How to properly place a pallet load on a stretch wrapper turntable using a pallet jack or fork lift.
How Do I Thread The Film?
Watch this video to find out how this exclusive feature locks loads to pallets, helping reduce the risk of damage during transportation.
Setting Up the Controls to Wrap a Load
The G Series controls were specifically designed to be used by anyone.
G Force Film Delivery System
The G Force Film Delivery System makes it really easy to set the film tension so you can wrap your loads as tight as possible to prevent product damage.
How Do I Adjust The Film Tension?
Film tension is easy to adjust on the G Series. Turn the tension knob counterclockwise to decrease or turn it clockwise to increase. Turn film tension on and off with the film tension lever.
How Much Tension Should I Apply?
How to know when you have the right amount of tension on your pallet loads. How much is too much and not enough.
How to Use the Pause Button
Pause the machine whenever you want, and restart where you left off, without resetting the stretch wrapping machine. Used for inserting labels, corner protection, etc.
How To Use Banding Mode
Great for when you want to reinforce a spot and wrap it tighter. It’s also great for when you need to keep the film from breaking when it reaches a sharp spot.
How to Rope
You can easily rope your pallet load on a Lantech G Series pallet wrapping machine. See how!
The G Series’ big turntable lets you put a standard 40″ x 48″ pallet on it without hanging over the edge.
The G Series is one of the safest stretch wrappers ever especially for people who do a lot of work around the stretch wrapping machine.
Pick the pallet wrapper up from the front or back, whichever is easiest for you.
How to Adjust Pallet Grip®
This video gives you step by step instructions on how to adjust Pallet Grip® on the G Series Stretch Wrapper. All you will need is a 9/64 Allen Wrench and a measuring tape.
Lantech G Series Features
Legendary Lantech quality and performance built into every G Series stretch wrapping feature. Get professional results with every pallet.
How to set the wrap height setting
The wrap height setting can be easily adjusted to allow you overwrap the top of the load or lower the height that you want the film to wrap on the load.
How to Troubleshoot
Film Delivery System Slack Chain Recovery Procedure
Step by step instructions on how to properly reset a G Series stretch wrapper from a Film Delivery System Slack Chain Condition.
How Do I Troubleshoot Common Issues?
Machine not starting, film breaks or loads pulling off the turntable? Here are some easy ways to overcome common issues.