Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Increases speed to maximum of 21 trays per minute. Please contact Lantech for details.
Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components
Please contact Lantech for details.
Exit Height Extension
The exit height can be extended.
Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
An alarm sounds to indicate the presence of a fault condition.
Throughput Speed Up to 21 Trays/Minute
Case Size Minimum
(Outside Dimensions) 280 mm L x 200 m W x 40 mm H
(11" L x 7 7/8" W x 1 1/2" H)
Case Size Maximum
(Outside Dimensions) 600 mm L x 400 mm W x 400 mm H
( 23 5/8" L x 15 3/4" W x 15 3/4" H)
Tray Types Display Tray
Wave Types B, C, E Wave or Combinations
Wall Types Single & Double Wall (test for multiple wall)Tray Closure
Tray Closure Robatech/NordsonService Requirements
Air Supply 6 Bar (80 psi)
Dedicated Electric Service Req. US 230V, 3ph, 60Hz, Wye w/Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50 Hz-NeutralMachine Data
Magazine infeed Capacity 280 Blanks (approximate)
Weight 750 kg (1650 lbs)
2730 mm L x 1880 mm W x 1800 mm H
(107 1/2" L x 74" W x 70 7/8" H)
Warranty Duration 3 Years, Unlimited Cycles