Non-Standard Case Dimension Machine can be modified for a variety of case dimensions. Please contact Lantech for details.
High Speed Increases speed to maximum of 30 cases per minute. Please contact Lantech for details
Communication Various communication configurations possible. Please contact Lantech for details.
Stainless Steel Frame or Components Please contact Lantech for details.
Exit Height Extension The exit height of the cases can be extended in increments of 50mm up to a maximum of 850mm.
Tape Head Storage Bracket Holds additional tape head.
3in Tape Head Applies 3" wide tape. Replaces standard 2" tape head.
Extended Magazine Increases the number of blanks the magazine holds.
Short Magazine Decreases the number of blanks the magazine holds.
Custom Options Many options available for case types and dimensions, speeds, closing methods, machine frame and magazine, and machine performance data communications are available. Please contact Lantech Customer Support if your requirements are not satisfied by the options published on this page.
Beacon Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.
Acoustic Signal An alarm sounds to indicate the presence of a fault condition.
Throughput Speed 10 cases per minute (30 cpm option)
Case Size Minimum (Outside Dimensions) 200 mm L x 150 mm W x 150 mm H (7 7/8" L x 5 7/8" W x 5 7/8" H)
Case Size Maximum (Outside Dimensions) 500 mm L x 325 mm W x 520 mm H (19 5/8" L x 12 3/4" W x 20 1/2" H)
Case Types RSC, HSC, FEFCO 0200/0201
Flute Types B, C, E or combinations
Wall Types Single & double wall (test for multiple wall)
Tape Lantech TH-Series
Hot Melt Refer to Manufacturer Manual
Air Supply 6 Bar (80 Psi)
Dedicated Electric Service Req. US 230V, 3-ph, 60 Hz, Wye w/Ground
Dedicated Electric Service Req. EU 3L-PE-400V-50 Hz-Neutral
Magazine infeed Capacity 200 cases (approximate)
Weight 700 kg (1540 lbs)
Dimensions 1955 mm L x 2280 mm W x 1800 mm H (77" L x 89 3/4" W x 70 7/8" H)
Outfeed Pass Height 600 mm +/- 30 mm (23 5/8" +/- 1 1/8")